# Firmware-releaser

> Firmware-releaser upp till och med 5.19 med ändringar och fixar. Release notes för 6.0 och senare finns i Pilot Web UI.

_Källa: E-Sharp (esharp.se) · Accordion Kalibrering & firmware_


> Release notes for firmware **6.0 and later** are published in the Pilot Web UI, not here. This table covers releases up to 5.19.

| Version | Status | Description |
| --- | --- | --- |
| 5.19 | Release | **Fixed** — Range switching on the Precision Current PSU (ESH10000690): switching `HIGH_RANGE` with a set-point above the target range could deliver ~2× the commanded current while reporting ~1/10 of the real value, with no error. A range change is now all-or-nothing and a non-expressible set-point is refused, naming the channel and value. Refused set-points are now discarded (previously kept and silently applied on the next range change). Unparseable analog-output values are now refused (previously written as 0 V). Alias files with unusable rows now apply every row they can and report the failures together; an export can be reloaded into the unit it came from. Clients can connect when the network has no address at startup. **Changed** — far more useful log files (full date per line, INFO+ kept, 20 files retained); HCI clock generator and edge counter supported; register-map range rows get per-element addresses; TPS23881 PoE watchdog arming fixed; Node-RED dashboard removed from the image. **Known limitation** — in low range the advertised maxima aren't reachable (current ~296 mA vs 600 mA, voltage ~24.07 V vs 25 V); use high range above them. |
| 5.18 | Release | Active Load ESH10000536: `MAX_JOULES` is now a read/write CONF channel (Ws, 10–10000), replacing the hard-coded 250 Ws budget; independent 100 °C thermal shutdown disables both loads; ITempReporter implemented so the chassis regulator sees the module temperature; fan runs on until the module drops below 40 °C. |
| 5.17 | Release | Calibration moved from per-board CSV files into the board's IDPROM UserData region, so it travels with the hardware; existing calibrations migrate automatically on first boot. Tables too large for the IDPROM (e.g. ESH10000535, 94 rows) keep using a CSV. Ten modules share one calibration implementation (ESH10000517, 533, 535, 536, 540, 556, 568, 590, 662, 690). New module ESH10000690 (Precision Light Table PSU). |
| 5.16 | Release | Power/PMBus seeding and NVM-restore resync; ESH10000662 PSU refinements; MAX6650 fan control fixes; new MPM54304 and TMP236 devices; MicroHAPS/HCI deterministic cold-start; short I2C/SPI reads now fail loudly instead of truncating; BootConfig atomic write with self-heal; mDNS hostname pinned to the static IP. |
| 5.15.0 | Release | CRPS power-supply capability registers advertised to the GUI; max output current derived from `MFR_POUT_MAX`; MicroHAPS I2C bus recovery; ESH10000662 exposed as two PowerSupply instruments (CH1/CH2) with scoped per-channel ADC acquisition and setpoints clamped to 0–25 V / 0–600 mA. |
| 5.14.0 | Release | New MicroHAPS handler (FTDI/I²C/JTAG bring-up) and Snowball extension (Lattice CPLD GPIO expander); CRPS migrated to Smdn.Devices.Mcp2221A; ESH10000662 gains sampled acquisition with a configurable sample count and TrimmedMean result; new AD5593R TrimmedMean result type; new APDS9306 light sensor. Fixes to CRPS PMBus GetStatus and module disposal on unload. |
| 5.13.0 | Release | USB port enable/disable (see boot.config); audit endpoint reveals who connected when; guard for ratiometric values outside 0–1. |
| 5.12.0 | Release | Fix nmcli privilege errors when running as the accordion user (commands now via sudo); graceful handling of blank service entries in boot.config; accordion.service systemd unit fixes. |
| 5.11.0 | Release | Firmware-ready for LED Zeppelin project; fixed a recursion bug when resetting the system; fixed an overflow bug in PMBus. |
| 5.10.0 | Release | New calibration REST API (`/api/calibration/...`); Alias/NetName interchangeable on all endpoints; .NET and Python clients add `CalibrationGroup`; UART configuration exposed; ESH10000590 split ADC/DAC buses with `DAC_GAIN` and `ADC_GAIN`; ESH10000662 `HIGH_RANGE` channel. Several calibration clamp/key fixes. |
| 5.9.0 | Release | Changed how the UART transaction works through the WebAPI. |
| 5.8.0 | Release | Bug fix: concurrent access could sometimes interfere. |
| 5.7.0 | Release | Fix: 5.6.0 had a faulty parameter preventing the service from starting. |
| 5.6.0 | Revoked | WebAPI race condition on reconnect (503); ESH10000534 PoE `RESTART_CLASSIFICATION` channel; protocol server IPv4-only binding. *(Revoked — see 5.7.0.)* |
| 5.4.0 | Release | .NET 10; fixes for PoE R4, FE R4 and Accordion M1. |
| 5.2.0 | Release | Communication fixes; Swagger + Node-RED; fully async; mDNS broadcasting; support for Accordion M1. |
| 4.1.1 | Release | Dual-connection network fallback: DHCP failover cut from 100+ s to 10–12 s, with automatic priority-based selection and dual-addressing (static + DHCP). New diagnostic scripts (`quick-network-check.sh`, `capture-network-diagnostics.sh`). Backward compatible with existing boot.config. |
| 4.1.0 | Release | Boot-configuration updates (see boot.config); audio/video/image engine; engine refactor; protocol-layer optimizations. |
| 4.0.8 | Debug — do not install unless instructed | Boot-configuration updates; audio/video/image engine; engine refactor; protocol-layer optimizations. |
