# Bus Transactions

> Monitor and analyse bus communication — I2C, SPI, UART and socket — in real time: transaction log, filters and troubleshooting.

_Source: E-Sharp (esharp.se) · Accordion Funktioner_


> **Note:** This page describes bus-transaction monitoring in the discontinued Windows application Accordion Pilot. The current interface is the browser-based [Web UI – Bus Transactions](/accordion/support/docs/webui-bus-transactions); the concepts apply to Accordion Shell's `i2c` command as well.

## Overview

The **Transactions** view provides real-time monitoring and analysis of bus communications including I2C, SPI, UART and socket transactions — essential for debugging communication, verifying protocol correctness and understanding device behaviour.

## Supported transaction types

- **I2C** — sensor comms, EEPROM, PMBus, RTC, I/O expanders. Details: address, operation (read/write/combined), data, ACK/NACK status, timing.
- **SPI** — flash, ADC/DAC, displays, SD cards. Details: chip select, mode (clock polarity/phase), MOSI/MISO data, clock speed, bit order.
- **UART** — serial console, GPS, Bluetooth, debug. Details: direction (TX/RX), data, baud rate, format (data/parity/stop), errors.
- **Socket** — TCP/UDP network comms. Details: protocol, IP:port, direction, payload, status.

## Transaction log

Each transaction shows timestamp, type, direction, address/channel, data (hex), status, duration and details. Auto-scroll follows the newest transactions; the log keeps a configurable number of recent transactions (default 1000) and drops the oldest.

## Filtering

Filter by type (I2C/SPI/UART/Socket), by address or channel (e.g. `0x3C`, `I2C_BUS_0`), by direction (read/write), by time range, and by searching the data content for a byte pattern.

## Transaction details

Expand a transaction for the full byte sequence and timing. For example, an I2C read is `START → ADDR+W → ACK → REG → ACK → RESTART → ADDR+R → ACK → DATA → NACK → STOP`; a write omits the restart/read. Errors (NACK, timeout, framing/parity for UART, connection loss for sockets) are highlighted in red.

## Sending custom commands

Trigger transactions from the Channels view, or from Accordion Shell:

```bash
accordionshell i2c --channel "I2C_BUS_0" --address 0x3C --data "01 02 03"
accordionshell i2c --channel "I2C_BUS_0" --address 0x3C --read --length 4
```

## Export & history

Export visible transactions to CSV/Excel for archiving or analysis, and clear the log between tests. Filter aggressively and clear regularly to keep performance up during long sessions.
