# Interconnect and the seam

> Review the interfaces between boards: the interconnect report, seam/lanes, an assembly as its own product, and cables read from a drawing.

_Source: E-Sharp (esharp.se) · Probe guide_


Many faults don't sit on a single board but in the **interface between** boards — connectors, cables, mating. Probe's interconnect part reviews that seam.

## The interconnect report

The report goes through the connections across an interface and raises deviations — a pinout that doesn't match between two sides, missing or mismatched signals. As always, each point is pinned at its connector and carries its source.

## Seam and lanes

A **seam** is the join between two boards or domains; **lanes** are the grouped paths across it. Probe can show and review them as a unit, so a lane that breaks or changes meaning across the seam becomes visible.

## An assembly as its own product

An assembly can be treated as its own product with its own seats and links between the constituent boards — so the review of the whole assembly hangs together, not just board by board.

## Cables from a drawing

Cables can be declared from their drawing, so the connection through a cable between two connectors becomes part of the review.

---

Related: [connector families](/en/probe/support/connector-families) and [customer standards and standard packs](/en/probe/support/customer-standards-and-standard-packs).

*Probe is E-Sharp's design-review engine. Interface findings cite the actual connectivity.*
