Modul ESH10000568

MPIO-96 SPI

Hög kanaldensitet för blandade signaler — 96 bidirektionella kanaler, omkonfigurerbara i drift.

  • 96 bidirektionella kanaler (12 grupper × 8), SPI-styrda
  • 12-bitars ADC och DAC, 0–5 V typiskt (AD5592R, 12×)
  • Analog in, analog ut eller pseudodigital I/O per kanal
  • Open-drain- och float-emulering via VL/VH-trösklar
  • Per-kanals kalibrering (gain/offset), lagrad på modulen
  • Höghastighets numerisk insamling via NumericResult
Pris på förfrågan
Beskrivning

ESH10000568 är en högdensitets mixed-signal-modul med 96 bidirektionella kanaler och SPI-baserad styrning. Varje kanal kan konfigureras som analog ingång, analog utgång eller pseudodigital I/O, och riktningen kan ändras i drift. Modulen passar täta PCBA-testfixturer och mixed-signal-produktionstest där kanalens roll ändras under körning, och integreras tätt med Accordion via konsekvent kanalnamngivning.

Användningsområden
PCBA-testsystem som kräver hög kanaldensitet med blandat analogt och digitalt beteende.
NPI- och produktionstest med dynamiska riktningsbyten.
Instrumentering som behöver pseudodigitala trösklar eller open-drain-beteende.
Flerkanalig analog insamling med valfri höghastighets numerisk aggregering.
Teknisk information

Specifikationer, anslutningar & manual

Allt tekniskt underlag på sidan — expandera en sektion, eller ladda ner hela databladet som PDF. Databladet finns endast på engelska.

Specifications

Parameter Specification
Module type MPIO-96 SPI Module
Total I/O channels 96 bidirectional
Channel grouping 12 groups × 8 channels
ADC resolution 12-bit
DAC resolution 12-bit
Supported modes Analog input, analog output, pseudo-digital I/O
Pseudo-digital thresholds Programmable VL / VH
Open-drain emulation Supported (VH < 0)
Floating-output emulation Supported (VL < 0)
Default channel direction Input
ADC/DAC device Analog Devices AD5592R (12×), 8 channels each
Analogue voltage range 0–5 V typical (2× mode)
Calibration Per-channel gain and offset, persistent storage
Numeric result channel Supported

Manual

Channel naming

All channels follow the convention {ModuleIndex}.ESH10000568.MPIO{00–95} — e.g. 1.ESH10000568.MPIO42. Additional logical channels: NumericResult (aggregated numeric acquisition) and CALIBRATION (per-channel table, 96 entries).

Channel configuration

All channels default to INPUT; direction must be configured before use and can be changed at runtime when used as pseudo-digital output. Batch configuration of channel groups (per 8) is recommended for performance.

Pseudo-digital modes

  • Open-drain emulation — set VH < 0: logical HIGH switches the channel to high-impedance INPUT; logical LOW drives VL.
  • Floating-output emulation — set VL < 0: logical LOW switches to high-impedance INPUT; logical HIGH drives VH.

Intended for interaction with external pull-ups or mixed-signal nodes.

High-speed acquisition

Synchronized multi-channel sampling with configurable sample rate and optional data reduction; results via the NumericResult channel.

Calibration

Per-channel gain and offset, stored on the module and applied automatically. Re-run after hardware replacement or significant temperature changes.


Pinout

The module exposes 96 user-facing I/O channels. Logical grouping maps directly to the internal AD5592R devices (8 channels each):

Channel range Internal device
MPIO00–07 AD5592R #0
MPIO08–15 AD5592R #1
MPIO16–23 AD5592R #2
MPIO24–31 AD5592R #3
MPIO32–39 AD5592R #4
MPIO40–47 AD5592R #5
MPIO48–55 AD5592R #6
MPIO56–63 AD5592R #7
MPIO64–71 AD5592R #8
MPIO72–79 AD5592R #9
MPIO80–87 AD5592R #10
MPIO88–95 AD5592R #11

On the A2/M1 configurations the 96 channels are presented on six 20-pin IDC connectors via the ESH10000355 breakout.

Relaterat

Application notes, case & nyheter

Insikter taggade för den här produkten.

Rätt Accordion för din bänk?

Berätta vad du testar så hittar vi rätt konfiguration — eller säger ärligt om en standarduppsättning räcker.

Boka en demo av Probe

Visa oss ditt kort — vi granskar det och går igenom fynden tillsammans.

Föredrar du att mejla? info@esharp.se