Module ESH10000568

MPIO-96 SPI

High channel density for mixed signals — 96 bidirectional channels, reconfigurable on the fly.

  • 96 bidirectional channels (12 groups × 8), SPI-controlled
  • 12-bit ADC and DAC, 0–5 V typical (AD5592R, 12×)
  • Analogue in, analogue out or pseudo-digital I/O per channel
  • Open-drain and float emulation via VL/VH thresholds
  • Per-channel calibration (gain/offset), stored on the module
  • High-speed numeric acquisition via NumericResult
Price on request
Description

ESH10000568 is a high-density mixed-signal module with 96 bidirectional channels and SPI-based control. Each channel can be configured as an analogue input, analogue output or pseudo-digital I/O, and the direction can be changed on the fly. The module suits dense PCBA test fixtures and mixed-signal production test where a channel's role changes during a run, and integrates tightly with Accordion through consistent channel naming.

Use cases
PCBA test systems that need high channel density with mixed analogue and digital behaviour.
NPI and production test with dynamic direction changes.
Instrumentation that needs pseudo-digital thresholds or open-drain behaviour.
Multi-channel analogue acquisition with optional high-speed numeric aggregation.
Technical information

Specifications, connections & manual

All technical material on the page — expand a section, or download the whole datasheet as a PDF.

Specifications

Parameter Specification
Module type MPIO-96 SPI Module
Total I/O channels 96 bidirectional
Channel grouping 12 groups × 8 channels
ADC resolution 12-bit
DAC resolution 12-bit
Supported modes Analog input, analog output, pseudo-digital I/O
Pseudo-digital thresholds Programmable VL / VH
Open-drain emulation Supported (VH < 0)
Floating-output emulation Supported (VL < 0)
Default channel direction Input
ADC/DAC device Analog Devices AD5592R (12×), 8 channels each
Analogue voltage range 0–5 V typical (2× mode)
Calibration Per-channel gain and offset, persistent storage
Numeric result channel Supported

Manual

Channel naming

All channels follow the convention {ModuleIndex}.ESH10000568.MPIO{00–95} — e.g. 1.ESH10000568.MPIO42. Additional logical channels: NumericResult (aggregated numeric acquisition) and CALIBRATION (per-channel table, 96 entries).

Channel configuration

All channels default to INPUT; direction must be configured before use and can be changed at runtime when used as pseudo-digital output. Batch configuration of channel groups (per 8) is recommended for performance.

Pseudo-digital modes

  • Open-drain emulation — set VH < 0: logical HIGH switches the channel to high-impedance INPUT; logical LOW drives VL.
  • Floating-output emulation — set VL < 0: logical LOW switches to high-impedance INPUT; logical HIGH drives VH.

Intended for interaction with external pull-ups or mixed-signal nodes.

High-speed acquisition

Synchronized multi-channel sampling with configurable sample rate and optional data reduction; results via the NumericResult channel.

Calibration

Per-channel gain and offset, stored on the module and applied automatically. Re-run after hardware replacement or significant temperature changes.


Pinout

The module exposes 96 user-facing I/O channels. Logical grouping maps directly to the internal AD5592R devices (8 channels each):

Channel range Internal device
MPIO00–07 AD5592R #0
MPIO08–15 AD5592R #1
MPIO16–23 AD5592R #2
MPIO24–31 AD5592R #3
MPIO32–39 AD5592R #4
MPIO40–47 AD5592R #5
MPIO48–55 AD5592R #6
MPIO56–63 AD5592R #7
MPIO64–71 AD5592R #8
MPIO72–79 AD5592R #9
MPIO80–87 AD5592R #10
MPIO88–95 AD5592R #11

On the A2/M1 configurations the 96 channels are presented on six 20-pin IDC connectors via the ESH10000355 breakout.

Related

Application notes, cases & news

Insights tagged for this product.

The right Accordion for your bench?

Tell us what you're testing and we'll find the right configuration — or say honestly if a standard setup is enough.

Book a demo of Probe

Show us your board — we review it and go through the findings together.

Prefer to email? info@esharp.se