Konfiguration ESH10000598

Accordion A2 Lite

En fullt provisionerad Accordion A2-nod ur lådan — koppla ström och nätverk, installera Pilot eller Shell och börja driva kanaler.

  • 96 mixed-signal-kanaler (MPIO-96) — analog in/ut och pseudodigital I/O
  • 96 signaler på sex 20-pins IDC-kontakter via N-TOP-breakout
  • 12-bitars ADC/DAC, 0–5 V typiskt (AD5592R)
  • Nätverksansluten — Web API, Pilot, Shell, Python, .NET eller TestStand
  • Livstidslicenser för Accordion Pilot och Shell ingår
Pris på förfrågan
Beskrivning

Accordion A2 Lite är en instegskonfiguration av Accordion A2-testplattformen, levererad som en färdig bundle för PCBA-test, NPI och småskalig produktionstest. Chassit är förmonterat med två moduler — MPIO-96 och 6× IDC N-TOP-breakout — som tillsammans exponerar 96 användarsignaler till en fixtur via standard 20-pins bandkabel. Större eller blandade instrumentkonfigurationer (PSU, PoE, ljud, batterisimulering) byggs med fler moduler på en full Accordion A2.

Användningsområden
Funktions- och parametrisk PCBA-test med 96 mixed-signal-kanaler.
NPI-bänkar där kanalroll (analog in/ut/digital) ändras under testutveckling.
Produktionsfixturer anslutna via 20-pins IDC-bandkabel till toppkortet.
Undervisning, utvärdering eller enstaka Accordion-stationer.
Innehåll i systemet

Moduler i konfigurationen

Det här sitter förmonterat i Accordion A2 Lite — klicka för datablad, specifikationer och anslutningar.

Teknisk information

Specifikationer, anslutningar & manual

Allt tekniskt underlag på sidan — expandera en sektion, eller ladda ner hela databladet som PDF. Databladet finns endast på engelska.

Specifications

System

Parameter Value Notes
Product name Accordion A2 Lite
Part number ESH10000598
Platform Accordion A2
Power input USB-C (USB-PD), via bundled 130 W power supply Use bundled supply only.
Power consumption, typical < 5 W At idle, all channels INPUT.
Network interface 1× RJ45, 10/100/1000 Mbit/s Back panel.
Auxiliary host ports 2× USB-A 2.0, 2× USB-A 3.0 Back panel.
Module slots populated 1× SO-DIMM (MPIO-96), 1× N-TOP (IDC breakout) See Manual → Hardware.
Module slots free 3× SO-DIMM, 3× N-TOP, 2× M.2 For future expansion.
Dimensions (W × D × H) 233 × 129 × 60 mm
Weight 1.02 kg
Compliance CE, RoHS, REACH

Included hardware

Item Qty Notes
Accordion A2 unit 1 Pre-configured with the modules below.
ESH10000568 — MPIO-96 SPI Module 1 96 reconfigurable channels, AD5592R-based. Installed in SO-DIMM slot T1.
ESH10000355 — 6× IDC N-TOP Breakout Module 1 96-signal breakout to 6× IDC 20-pin. Installed in N-TOP slot N1.
USB-C power supply 1 130 W, USB-PD.
USB-C power cable 1 1 m.
Quick start card 1 Hostname, MAC, default settings.

Channel summary (provided by the bundled modules)

Parameter Value
Total user channels 96
Channel type Bidirectional, software-configurable
Modes per channel Analog input, analog output, pseudo-digital I/O
ADC resolution 12-bit
DAC resolution 12-bit
Analog range 0–5 V typical (AD5592R 2× mode)
Pseudo-digital thresholds Programmable VL / VH per channel
Open-drain emulation Supported (set VH < 0)
Floating-output emulation Supported (set VL < 0)
High-speed acquisition Supported, exposed via NumericResult channel
Calibration Per-channel gain and offset, persistent on module
Max voltage / current at IDC pin 5 V / 2 A
IDC pin-1 / pin-2 fusing 0.25 A thermistor fuse (5 V / 12–20 V rails)
ESD on IDC connectors IEC 61000-4-2, ±30 kV contact, ±30 kV air

Lifetime licenses for Accordion Shell and Accordion Pilot are included. The Web API, the Python package accordionq2, and the .NET client AccordionQ2.WebApiClient are open clients and need no separate license.


Manual

Hardware

The unit is the standard Accordion A2 chassis with two pre-installed modules (MPIO-96 in SO-DIMM slot T1, IDC breakout in N-TOP slot N1). The 96 DATA signals from the MPIO-96 route directly to the IDC connectors J1–J6, 16 signals per connector.

Power-on: connect the bundled USB-C supply to the POWER port, connect Ethernet to the control network, press the power button, and wait for boot. The unit is reachable by hostname (on the quick-start card) or DHCP IP.

Connecting a fixture: use standard 20-pin (2×10, 2.54 mm) IDC ribbon from J1–J6 to the fixture; verify pin-1 orientation before mating. Each connector exposes 16 signal lines, the 5 V rail (pin 1), the 12–20 V rail (pin 2) and GND. Per-pin signal limit 5 V / 2 A; pin-1/pin-2 rails thermistor-fused at 0.25 A. Power down before changing wiring.

Software

All interaction is over the Web API, optionally fronted by Pilot, Shell, the Python/.NET clients or TestStand.

Channels follow {ModuleIndex}.ESH10000568.MPIO{00–95} (e.g. 1.ESH10000568.MPIO42). All MPIO channels boot in INPUT mode — configure direction before driving. The IDC breakout is passive; its pins are addressed via the corresponding MPIO channel.

from accordionq2 import Pilot
pilot = Pilot(host="accordion-a2-lite-XXXX")
pilot.attach()
ch = pilot.get_channel("1.ESH10000568.MPIO00")
ch.configure(mode="analog_output")
ch.write_analog(2.500)
v = pilot.get_channel("1.ESH10000568.MPIO01").read_analog()

Pseudo-digital modes use VL/VH thresholds; set VH < 0 for open-drain emulation, VL < 0 for floating-output. High-speed synchronized sampling is exposed via NumericResult. Per-channel gain/offset calibration is stored on the module and applied automatically.


Pinout

Top — IDC signal connectors (J1–J6, on ESH10000355)

Six 20-pin (2×10, 2.54 mm) IDC connectors. Pin 1 is indicated by the connector chamfer and the marked ribbon wire.

Connector Signals (DATA[…]) Mapped MPIO channels
J1 DATA[0–15] MPIO00–MPIO15
J2 DATA[16–31] MPIO16–MPIO31
J3 DATA[32–47] MPIO32–MPIO47
J4 DATA[48–63] MPIO48–MPIO63
J5 DATA[64–79] MPIO64–MPIO79
J6 DATA[80–95] MPIO80–MPIO95

Pin 1 = +5 V and pin 2 = +12–20 V (both thermistor-fused at 0.25 A); pins 3–20 carry 16 DATA signals and GND returns. Back panel: RJ45 (NET), USB-C (POWER, bundled supply only), 4× USB-A. Front panel: power button.

Relaterat

Application notes, case & nyheter

Insikter taggade för den här produkten.

Rätt Accordion för din bänk?

Berätta vad du testar så hittar vi rätt konfiguration — eller säger ärligt om en standarduppsättning räcker.

Boka en demo av Probe

Visa oss ditt kort — vi granskar det och går igenom fynden tillsammans.

Föredrar du att mejla? info@esharp.se