Konfiguration ESH10000599

Accordion A2 Plus

Fulladdad Accordion A2 — mät, mata, prata med och övervaka din DUT från en enda nätverksansluten nod.

  • 96 mixed-signal-kanaler (MPIO-96) för analog in/ut och pseudodigital I/O
  • 2-kanals programmerbar PSU, 0–20 V / 0–10 A, 60 W, med PMBus-telemetri
  • I²C, UART, SPI, JTAG, fläktstyrning och RGB-status i kommunikationsmodulen
  • Nätverksansluten — styrs från Web API, Pilot, Shell, Python, .NET eller TestStand
  • Livstidslicenser för Accordion Pilot och Shell ingår
Beskrivning

Accordion A2 Plus är en fulladdad konfiguration av Accordion A2-testplattformen, levererad som en färdig bundle för PCBA-test, NPI och produktionstest där du behöver både mixed-signal-kanaler och programmerbar kraft och protokollkommunikation på samma nod. Chassit är förmonterat med fyra moduler — MPIO-96, 6× IDC N-TOP-breakout, M.2 PSU och kommunikationsmodulen — så att en enda nätverksansluten enhet kan mäta, mata, exercera och övervaka din DUT utan att du bygger ihop konfigurationen från enskilda moduler.

Användningsområden
Funktions- och parametrisk PCBA-test som kombinerar 96 mixed-signal-kanaler med en eller två programmerbara matningar.
Mjukvarustyrda kraftaggregat med per-kanals telemetri.
Bring-up-bänkar som pratar med DUT:en över I²C, UART, SPI eller JTAG samtidigt som de matar och mäter den.
Produktionsfixturer med fläktstyrd kylning och operatörssynlig RGB-statusindikering.
Höghastighets numerisk insamling för läckagetest, rail-stabilitet och sensorkarakterisering.
Teknisk information

Specifikationer, anslutningar & manual

Allt tekniskt underlag på sidan — expandera en sektion, eller ladda ner hela databladet som PDF. Databladet finns endast på engelska.

Specifications

System

Parameter Value Notes
Product name Accordion A2 Plus
Part number ESH10000599
Platform Accordion A2
Power input USB-C (USB-PD), via bundled 130 W power supply Use bundled supply only.
Power consumption, typical < 5 W At idle, all channels INPUT, PSU outputs disabled.
Network interface 1× RJ45, 10/100/1000 Mbit/s Back panel.
Auxiliary host ports 2× USB-A 2.0, 2× USB-A 3.0 Back panel.
M.2 slots 2, on the front panel (M1, M2) M1 populated by the PSU module; M2 free.
Module slots populated SO-DIMM T1 (MPIO-96), N-TOP N1 (IDC breakout), dedicated communication TOP, front-panel M.2 M1 (PSU)
Module slots free 3× SO-DIMM (T2, T3, A1), 3× N-TOP (N2, N3, N4), 1× M.2 (M2) For future expansion.
Dimensions (W × D × H) 233 × 129 × 60 mm
Weight 1.08 kg
Compliance CE, RoHS, REACH

Included hardware

Item Qty Notes
Accordion A2 unit 1 Pre-configured with the modules below.
ESH10000568 — MPIO-96 SPI Module 1 96 reconfigurable channels, AD5592R-based. SO-DIMM slot T1.
ESH10000355 — 6× IDC N-TOP Breakout Module 1 96-signal breakout to 6× IDC 20-pin. N-TOP slot N1.
ESH10000533 — M.2 PSU Module 1 Dual programmable supply, 60 W total. Front-panel M.2 slot M1.
ESH10000359 — Communication Module 1 I²C / UART / SPI / JTAG, fan control, RGB status LEDs.
USB-C power supply 1 130 W, USB-PD.
USB-C power cable 1 1 m.

Included software licenses (lifetime)

Product License Notes
Accordion Shell Lifetime, single-unit CLI tool. dotnet tool install -g AccordionQ2.Shell.
Accordion Pilot Lifetime, single-unit Windows GUI.

The Web API, the Python package accordionq2, and the .NET client AccordionQ2.WebApiClient are open clients and are usable without separate licensing.

Channel summary

MPIO-96 (ESH10000568)

Parameter Value
User channels 96, bidirectional
Modes per channel Analog input, analog output, pseudo-digital I/O
ADC / DAC resolution 12-bit / 12-bit
Analog range 0–5 V typical (AD5592R 2× mode)
High-speed acquisition Supported, exposed via NumericResult
Max voltage / current at IDC pin 5 V / 2 A
ESD on IDC connectors IEC 61000-4-2, ±30 kV contact, ±30 kV air

M.2 PSU (ESH10000533)

Parameter Value
Channels 2, independent (CH1, CH2)
Output voltage 0–20 V
Output current 0–10 A
Maximum total output power 60 W (derated, summed across both channels)
Controller Linear Technology LTC3889 (PMBus)
Telemetry READ_VOUT, READ_IOUT, READ_POUT, READ_VIN, READ_IIN, READ_TEMPERATURE_1/2

Communication module (ESH10000359)

Parameter Value
Communication interfaces 2× I²C, UART (RS232), SPI, JTAG
Analog channels 4× VOUT (output-only), 4× MPIO (bidirectional)
Fan control 2× PWM with tachometer feedback (MAX6650)
Status LEDs 8× RGB (I2C1, I2C2, UART, SPI, JTAG, POWER, FAN, ADCIO)
Always-on chassis power rails 20 V, 12 V, 5 V, 3.3 V; each thermal-fused at 0.5 A

Constraints

  • 96 user signals on the IDC connectors are routed 1:1 from the MPIO-96 — no conditioning, no multiplexing.
  • PSU module: 60 W total across both channels (derated from per-channel maximum).
  • IDC connectors: 5 V max, 2 A max per signal pin; +5 V and +12–20 V rails are thermistor-fused at 0.25 A.
  • USB-C powered. The bundled 130 W USB-PD supply is the only supported supply.

Connections (pinout)

Back-panel chassis connectors

Designator Type Direction Description Notes
NET RJ45 Bidirectional Ethernet to control network 10/100/1000 Mbit/s.
POWER USB-C Power input 5–20 V (USB-PD) from bundled supply Use bundled 130 W supply only.
USB1–USB4 USB-A Bidirectional Auxiliary host ports 2× USB-A 2.0 + 2× USB-A 3.0.

Front-panel M.2 PSU module — output connectors (J2, J3)

Pin Signal (CH1 / CH2) Direction Description
J2_1 / J3_1 VPSU_0 / VPSU_1 Power out Settable supply (0–20 V), per-channel.
J2_2 / J3_2 VSENSE+_0 / VSENSE+_1 Input Remote sense, positive terminal.
J2_3 / J3_3 VSENSE-_0 / VSENSE-_1 Input Remote sense, negative terminal.
J2_4 / J3_4 GND — Common ground.

Top — IDC signal connectors (J1–J6)

Six 20-pin (2×10, 2.54 mm pitch) IDC connectors. Connector → DATA-line mapping (1:1 to MPIO-96 via SO-DIMM slot T1):

Connector Signals (DATA[…]) Mapped MPIO channels
J1 DATA[0–15] MPIO00–MPIO15
J2 DATA[16–31] MPIO16–MPIO31
J3 DATA[32–47] MPIO32–MPIO47
J4 DATA[48–63] MPIO48–MPIO63
J5 DATA[64–79] MPIO64–MPIO79
J6 DATA[80–95] MPIO80–MPIO95

Per-connector fixed pins: pin 1 = +5 V (thermistor-fused 0.25 A), pin 2 = +12–20 V (thermistor-fused 0.25 A), pins 3–20 = 16× DATA + GND returns.

Manual

Power-on procedure

  1. Connect the USB-C power supply to mains.
  2. Connect the USB-C cable from the supply to the POWER port on the front of the unit.
  3. Connect an Ethernet cable from the front-panel RJ45 to the same network as the controlling PC.
  4. Press the power button on the back of the unit and wait for it to boot.
  5. The unit is reachable by hostname (printed on the quick start card) or by DHCP-assigned IP.

The chassis power rails (20 V, 12 V, 5 V, 3.3 V) are live at boot and thermal-fused at 0.5 A. The PSU outputs (VPSU_0, VPSU_1) are NOT enabled at boot — they require explicit software enable (OPERATION / OUTPUT_ENABLE per channel).

Channel naming

Module Convention Example
MPIO-96 (ESH10000568) {ModuleIndex}.ESH10000568.MPIO{00–95} 1.ESH10000568.MPIO42
Communication (ESH10000359) {ModuleIndex}.ESH10000359.{ChannelName} 15.ESH10000359.I2C1
PSU (ESH10000533) {ModuleIndex}.ESH10000533.{Address}.{Channel}.{Register} 0.ESH10000533.0x4F.CH1.VOUT_COMMAND

Driving the MPIO-96

from accordionq2 import Pilot

pilot = Pilot(host="accordion-a2-plus-XXXX")
pilot.attach()

# Configure MPIO00 as analog output, drive 2.500 V
ch = pilot.get_channel("1.ESH10000568.MPIO00")
ch.configure(mode="analog_output")
ch.write_analog(2.500)

# Read MPIO01 as analog input
v = pilot.get_channel("1.ESH10000568.MPIO01").read_analog()

Driving the M.2 PSU module

psu_ch1 = pilot.get_channel("0.ESH10000533.0x4F.CH1.VOUT_COMMAND")
psu_ch1.write(3.300)                                    # 3.3 V on CH1

en = pilot.get_channel("0.ESH10000533.0x4F.CH1.OPERATION")
en.write(True)

vout = pilot.get_channel("0.ESH10000533.0x4F.CH1.READ_VOUT").read()

The 60 W ceiling is a total across both PSU channels. Plan combined V × I to stay below 60 W or expect over-power protection to fire.

Ladda ner datablad (PDF) →
Relaterat

Application notes, case & nyheter

Insikter taggade för den här produkten.

Rätt Accordion för din bänk?

Berätta vad du testar så hittar vi rätt konfiguration — eller säger ärligt om en standarduppsättning räcker.

Boka en demo av Probe

Visa oss ditt kort — vi granskar det och går igenom fynden tillsammans.

Föredrar du att mejla? info@esharp.se