Hardware · Test fixture

Harmonix — bed-of-nails fixture

A bed-of-nails fixture in three sizes — built on Ingun, with the instruments built in and a top plate that contacts your board via bed of nails or connectors.

Three sizes · Ingun-based · instruments & PC built in

Harmonix Grande with the lid open — test instruments and control PC built in
What it is

Bed-of-nails contacting, instruments inside

Harmonix is a bed-of-nails fixture built on Ingun fixturing and configured for the Accordion ecosystem. It comes in three sizes — Compact, Space and Grande — with the instruments and a control PC built in, and a custom top plate that contacts your board via bed of nails or connectors.

Harmonix presses the board onto the bed of nails through a lid that moves in parallel, so the contact is even across the board and repeatable unit after unit. When the DUT changes often or a bed of nails isn't needed, Octave is the parametric option.

Three sizes

One fixture family, three sizes

Compact, Space and Grande let a product range standardise on one fixture family — instead of a bespoke jig per board.

Compact

The smallest — a compact footprint for smaller boards.

Space

The same footprint as Grande, but lower — for stations that don’t need as much room for instruments inside.

Grande

The largest — full height, with the most room for built-in instruments.

Inside the fixture

Built on Accordion, orchestrated by Assert

The instrument layer inside Harmonix is Accordion: one chassis replaces five to eight separate instruments — DMM, programmable PSU, active load, DAQ, PoE, bus master — driven from a single API in Python, C# or TestStand. The same test code runs from design verification through NPI to production, orchestrated by Assert. We design and build the whole DUT-specific adaptation under one roof — top plate, bed-of-nails board and pogo-pin/test adapters per interface.

Harmonix Grande — lid closed
Harmonix — the instrument layer inside
Harmonix — rear with connectors and fan
Where it fits

Typical use

Production test

Functional and in-circuit test on the line, repeatable unit after unit.

High pin count

Boards that need a bed of nails to reach the test points.

Higher volume

Repeatable contacting where cycle time and consistency matter.

Harmonix is part of our functional-test engagement

We don't sell Harmonix standalone — it's the fixture layer in a complete test system we design and build for your product, from contacting to instruments to analysis-ready data.

Book a demo of Probe

Show us your board — we review it and go through the findings together.

Prefer to email? info@esharp.se