Bus Transactions

Övervaka och analysera busskommunikation — I2C, SPI, UART och socket — i realtid: transaktionslogg, filter och felsökning.

Originaldokumentationen är på engelska. Visa som Markdown (för AI/KB)

Note: This page describes bus-transaction monitoring in the discontinued Windows application Accordion Pilot. The current interface is the browser-based Web UI – Bus Transactions; the concepts apply to Accordion Shell’s i2c command as well.

Overview

The Transactions view provides real-time monitoring and analysis of bus communications including I2C, SPI, UART and socket transactions — essential for debugging communication, verifying protocol correctness and understanding device behaviour.

Supported transaction types

  • I2C — sensor comms, EEPROM, PMBus, RTC, I/O expanders. Details: address, operation (read/write/combined), data, ACK/NACK status, timing.
  • SPI — flash, ADC/DAC, displays, SD cards. Details: chip select, mode (clock polarity/phase), MOSI/MISO data, clock speed, bit order.
  • UART — serial console, GPS, Bluetooth, debug. Details: direction (TX/RX), data, baud rate, format (data/parity/stop), errors.
  • Socket — TCP/UDP network comms. Details: protocol, IP:port, direction, payload, status.

Transaction log

Each transaction shows timestamp, type, direction, address/channel, data (hex), status, duration and details. Auto-scroll follows the newest transactions; the log keeps a configurable number of recent transactions (default 1000) and drops the oldest.

Filtering

Filter by type (I2C/SPI/UART/Socket), by address or channel (e.g. 0x3C, I2C_BUS_0), by direction (read/write), by time range, and by searching the data content for a byte pattern.

Transaction details

Expand a transaction for the full byte sequence and timing. For example, an I2C read is START → ADDR+W → ACK → REG → ACK → RESTART → ADDR+R → ACK → DATA → NACK → STOP; a write omits the restart/read. Errors (NACK, timeout, framing/parity for UART, connection loss for sockets) are highlighted in red.

Sending custom commands

Trigger transactions from the Channels view, or from Accordion Shell:

accordionshell i2c --channel "I2C_BUS_0" --address 0x3C --data "01 02 03"
accordionshell i2c --channel "I2C_BUS_0" --address 0x3C --read --length 4

Export & history

Export visible transactions to CSV/Excel for archiving or analysis, and clear the log between tests. Filter aggressively and clear regularly to keep performance up during long sessions.

Boka en demo av Probe

Visa oss ditt kort — vi granskar det och går igenom fynden tillsammans.

Föredrar du att mejla? info@esharp.se