init – anslut

Upprättar anslutningen till en Accordion-station — kör detta först, före övriga kommandon.

Originaldokumentationen är på engelska. Visa som Markdown (för AI/KB)

Description

The init command establishes a connection to an Accordion hardware device. This is typically the first command you run before performing any hardware operations.

Syntax

init --host <hostname_or_ip> [options]

Required Options

Option Short Description
--host -h The hostname or IP address of the Accordion hardware to connect to

Optional Options

Option Short Description Default
--notification -n Enable notification event reception false
--telemetry -t Enable telemetry event reception false

Examples

Basic Connection

init --host 192.168.1.100

Connection with Notifications

init --host accordion-dev-01 --notification

Connection with Telemetry

init --host 192.168.1.100 --telemetry

Connection with Both Events

init -h 192.168.1.100 -n -t

Behavior

  1. Establishes connection to the specified host
  2. Calls WebApiState.Connect() with the host URL
  3. Retrieves connection status from the API
  4. Warns if host responds but reports not connected
  5. Reports success message
  6. If notification or telemetry flags are used, displays a notice that they are not supported in WebApi mode

Output

Success message:

Connecting to http://192.168.1.100...
Connected to http://192.168.1.100

With notifications/telemetry requested:

Connecting to http://192.168.1.100...
Connected to http://192.168.1.100
  → Notifications requested but not supported in WebApi mode
  → Telemetry requested but not supported in WebApi mode

Event Handlers

The --notification and --telemetry flags are accepted but not currently supported in WebApi mode. A dim-coloured notice is displayed when they are used. The flags exist for compatibility but have no effect in the current WebApi client.

Notes

  • You must initialize a connection before using most other commands
  • Only one connection can be active at a time
  • Connection state persists in interactive mode
  • Use this command first in batch scripts

Error Handling

  • Host not found: Check hostname/IP address
  • Connection refused: Verify the Accordion service is running
  • Timeout: Check network connectivity and firewall settings

Boka en demo av Probe

Visa oss ditt kort — vi granskar det och går igenom fynden tillsammans.

Föredrar du att mejla? info@esharp.se