Originaldokumentationen är på engelska. Visa som Markdown (för AI/KB)
Three pages set up how the station’s channels and hardware are configured. The Alias files page manages the files that name and set up your channels. The Start-up page sets what the station applies each time the hardware app starts. The Extensions page loads and unloads extension modules. Open them from the side menu.
Alias files
An alias file is a CSV file that gives your channels their aliases, groups, types, directions, units and other settings. The page lists the alias files stored on the station, each with its File name, State (Active, with the order when several are active), an At start-up switch, and an Activate button and ⋮ menu.
- Upload a
.csvfile (files over 1 MB are refused) — uploading only stores it; it does not change your channels until you activate it. - Activate applies the file now: it can rename channels and change groups/units/descriptions, change channel types and directions, enable/disable channels, and drive outputs that have a default value to that value. The change lasts until the hardware app restarts or resets; switch on At start-up to keep it.
- Save current as… writes the channels’ current setup to a new alias file on the station.
- Download / Delete… a file from its menu.
Activating a file can drive outputs. Make sure nothing connected to the station can be harmed before you activate.
An alias file has one row per channel with columns Alias, NetName (identifies the channel), GroupName, Enabled, ChannelType, Capability, Direction, DefaultValue, Option1–3, Unit, Description and ChannelTypeCapability. For analog channels, Option1 and Option2 are the calibration gain and offset — leave them empty to keep the unit’s own calibration.
Start-up
The Start-up page edits the station’s start-up configuration (boot.config) — what the hardware app applies when it starts. You edit a draft (an Unsaved changes label shows differences), click Save… and confirm; nothing changes on the station until the hardware app next starts (restart it from System to apply now). If someone else changed boot.config meanwhile, saving is refused with a Changed elsewhere label.
Sections: General (apply boot.config at start-up; description), Alias files (ordered list; a later file overrides an earlier one), Modules (loaded after start-up), Network (static IPv4 addresses beside DHCP), Wi-Fi (SSID and 8–63-character password; only on hardware with Wi-Fi), Devices (USB power on/off; look for audio/video/image devices) and Services (applied at every start; the hardware app and the GUI’s web service can’t be turned off here).
Extensions
The Extensions page lists the extension modules from the station’s modules.config, each with a Loaded switch, Module, Class and Assembly. Switch Loaded on to load a module (which resets the hardware it drives and adds its channels) or off to unload it (removing its channels). Loading here lasts until the hardware app restarts; add a module on the Start-up page to load it every time.