Stackup and copper

Layer stack, reference plane, creepage and copper geometry in Probe — what the viewer shows and what's checked.

View as Markdown (for AI/KB) Whole knowledge base (llms.txt)

The stackup part is about the board’s physical build-up: the layer stack, the reference plane and the copper. It’s the material for both signal integrity and power.

The layer stack

Stackup shows the layer order — copper, dielectric, plane — as the ODB++ describes it. It’s used to reason about impedance and return paths.

Reference plane

For a signal layer, the nearest reference plane matters. Probe can point out the reference plane and raise when a signal lacks a good one (a return path that doesn’t hold).

Creepage

Creepage requirements describe the necessary distances across the surface between conductors at different potentials. Probe can hold requirements and raise where the geometry isn’t enough.

Copper geometry

The copper geometry (widths, areas, connections) sits behind the current analyses — see power and PDN. Pure manufacturing geometry (DFM/clearance) is deliberately left to the CAM tools; Probe owns the functional side.


Related: signal integrity and the viewer — a tour.

Probe is E-Sharp’s design-review engine. Clearance and manufacturing geometry sit with the CAM tools by design.

Book a demo of Probe

Show us your board — we review it and go through the findings together.

Prefer to email? info@esharp.se