The viewer — a tour

A walkthrough of the Probe viewer: board picker, stackup layers and overlay, locate a component, net highlight and ratsnest, click-to-identify and coordinate readout.

View as Markdown (for AI/KB) Whole knowledge base (llms.txt)

The web viewer is where you see the board and the findings. Probe itself doesn’t reason in the viewer — it presents the as-built connectivity and the cited findings the review produced. Here are the parts you use most.

Board picker and layers

Pick board and take at the top. The stackup layers can be turned on and off and placed in overlay — copper, mask, paste, silk, drill — in the board’s own millimetre coordinate system (X right, Y up). That’s how questions no netlist can answer get answered: is a fiducial clear, do two designators collide, does silk run over a pad.

Locate and cross-probe

  • Locate component — find a reference designator on the board.
  • Net highlight + ratsnest — mark a net and see its connections.
  • Component ↔ net cross-probing — jump between a part and the nets it sits on.
  • Click to identify — click on the board and find out what’s there.

Findings and readout

The design-rule findings are shown in the viewer, pinned at net, layer or component. Coordinate readout and performance counters are there for anyone who wants to measure and troubleshoot.


Related: read and export findings. Deep dives: power and PDN, signal integrity, stackup and copper.

Probe is E-Sharp’s design-review engine. The viewer shows the as-built — the AI in your tool does the reasoning.

Book a demo of Probe

Show us your board — we review it and go through the findings together.

Prefer to email? info@esharp.se